How To Open Terminal Services Configuration

In gild for clients to establish Terminal Services sessions on a server, listener connections take to be configured on the item server. A listener connection tin be configured for only RDP (Remote Information Protocol) over TCP/IP. Ane listener connection can be configured for a network interface card (NIC) in the Terminal Services computer. The Concluding Services Configuration tool creates new listener connections to change configuration settings on existing listener connections and to configure server policy settings. While information technology is recommended to configure Terminal Services connections through Group Policy, the Terminal Services Configuration tool enables users to configure settings separately for multiple connections on 1 calculator. The Last Services Configuration tool tin be used to configure connections for ICA (Independent Computing Compages) clients using IPX, SPX, NetBIOS, TCP/IP, or Asynchronous.

Configuring Terminal Services Server Settings with Terminal Services Configuration

The Terminal Services Configuration tool can be used to change settings for all connections to a particular server. The tool is automatically installed when Final Services is first installed.

To open the Final Services Configuration tool:

Click Get-go, Authoritative Tools, and Concluding ServicesConfiguration

The Server Settings node in Terminal Services Configuration manages server settings, which in turn affects sessions running on the Terminal Services server.

To configure server settings:

Open the Terminal ServicesConfiguration tool.
Click the Server Settings node in the left pane of the Terminal Services Configuration window.
The Results pane lists the server configuration settings that tin can exist set.
Right click the server setting to be modified and select Backdrop from the shortcut menu.
Change the setting.

The server settings displayed in the Results pane of the Terminal Services Configuration window when the Server Settings node is selected are listed below:

Delete Temporary Folders On Exit: If this setting is enabled, all temporary folders created on the server are deleted when the user logs off. This setting is enabled by default.
Use Temporary Folders Per Session: If the setting is enabled, each session has its own temporary folders.This setting is enabled by default.
Licensing: Users tin choose betwixt Per User and Per Device licensing.
Active Desktop: Enabling this setting allows connections to employ Active Desktop at the expense of bandwidth.
Permission Capability: Users tin can choose between Full Security or Relaxed Security. Full Security is the default setting.
Restrict Each User To 1 Session: Enabling this setting limits users to 1 session on the Final Services server.
Session Directory: Enabling this setting results in Session Directory managing the sessions within the cluster. This setting is disabled by default.

Modifying Terminal Services Connection Properties with Final Services Configuration

The Concluding Services Configuration tool can be used to change the properties of existing connections. The Microsoft Remote Data Protocol (RDP) 5.2 is the only protocol that installed by default. Before changing the connections' properties, it is important to bear in mind that each property setting that is configured affects each user that connects with the particular connection.

To change an existing connection's connection backdrop settings:

Click Start, Administrative Tools, and Terminal Services Configuration
Click the Connections node in the left pane of the Terminal Services Configuration window.
The Results pane lists all existing connections.
The default connexion is namedRDPTcp.
To change the properties of any of the listed connections in the Results pane, correct click the connection, and so click Backdrop on the shortcut menu.
The Properties dialog box of the connectedness selected opens. The Properties dialog box contains the following tab:

To change an existing connection's connection backdrop settings:

Click Get-go, Administrative Tools, and Terminal Services Configuration
Click the Connections node in the left pane of the Terminal Services Configuration window.
The Results pane lists all existing connections.
The default connexion is namedRDPTcp.
To change the properties of whatever of the listed connections in the Results pane, correct click the connection so click Backdrop on the shortcut menu.
The Properties dialog box of the connectedness selected opens. The Backdrop dialog box contains the post-obit tab:

To modify an existing connection's connection properties settings:

Click Get-go, Administrative Tools, and Concluding Services Configuration
Click the Connections node in the left pane of the Last Services Configuration window.
The Results pane lists all existing connections.
The default connectedness is namedRDPTcp.
To change the properties of any of the listed connections in the Results pane, correct click the connexion then click Properties on the shortcut menu.
The Properties dialog box of the connection selected opens. The Properties dialog box contains the following tab:

- General tab, Logon Settings tab, Sessions tab, Environment tab, Remote Control tab, Client Settings tab, Network Adapter tab, and Permissions tab.

The settings that can exist changed on the Full general tab are listed below. The tab identifies the connection blazon (RDP-Tcp) and the RDP version number and enables the encryption level that will be required for the connexion to Terminal Services to exist changed.

Annotate box: A brusque note tin can be entered in this box.
Encryption Level: The settings that can be configured are listed below:
- Low: The standard encryption key is used to encrypt information from the client to the server. If a client cannot support 56-bit encryption, it will not be able to establish a connection.
- Client Compatible: This is the default setting. Information is encrypted with the maximum level of encryption that the client supports.
- High: Data is encrypted in both directions with the maximum encryption key. Clients that practice not support 128-chip encryption volition not be able to connect.
- FIPS Compliant: Data is encrypted in both directions through the Federal Information Processing Standard (FIPS) encryption algorithms.
Use Standard Windows Authentication checkbox: The checkbox can be enabled to ensure that Windows authentication used for Terminal Services connections.

The settings that can be changed on the Logon Settings tab are listed beneath:

Use Customer-Provided Logon Data: Select this option to ensure that the server accepts the credentials that the client provided. This means that the client essentially determines the logon security user.
Always Use The Following Logon Data: Choose this option if one desires to specify the logon information that should be used for all users. This basically allows all users to log on to the server automatically, no credentials demand to be provided. When this option is selected, enter the advisable data in:
- User Proper noun text box
- Domain text box
- Countersign and Ostend password text boxes
Always Prompt For Password: If this option is selected, the user volition be prompted to provide a valid password.

The settings that can be inverse on the Sessions tab are listed below:

Override User Settings checkbox: When selected, user settings are overridden and the options listed below are available:
- End a disconnected session: Users tin fix the fourth dimension for which a asunder session can go along running on the Concluding Services computer.
- Active session limit: Users tin set the time for which active sessions can remain connected to the Last Services reckoner.
- Idle session limit: Users tin set the time for which an idle session tin can stay connected to Terminal Services computer.
Override User Settings checkbox: When enabled, the 2 options listed below become available and relate to when the session limit is reached or the connection is cleaved:
- Disconnect from session
- End session
Override User Settings checkbox: When enabled, the Let Reconnection setting can be configured every bit:
- From any client
- From previous customer

The settings that can be changed on the Environment tab are listed beneath:

Program path and file name: Indicates the plan path and executable file that would be run when connection is established.
Starting time in: If the plan needs working directory, enter it here.

The settings that can be changed on the Remote Control tab are listed below:

Use remote control with default user settings selection: This is the default option. The settings for remote command are configured in the user business relationship's properties.
Do not allow remote command choice: All remote control to sessions are disabled or blocked.
Use remote control with the following settings: Allows users to specify the remote control settings that should be used for all users connecting to the Terminal Services server through the connexion:
- Require user's permission checkbox: Enable this checkbox if displaying a message that requests remote control to the user is desired.
- To specify the level of control immune over the session, select the View the session choice or the Interact with the session option.

The settings that can be changed on the Client Settings tab are listed below:

Use connection settings from user settings checkbox: When enabled, users can choose the options listed below:
- Connect client drives at logon
- Connect client printers at logon
- Default to primary client printer
Limit Maximum Color Depth checkbox: When enabled, the maximum color depth that clients utilize tin be selected. The Default setting is 16-flake.

Users can also choose to disable the following options using the checkboxes listed below:
- Drive Mapping – client drives are not mapped to the session
- Windows Printer Mapping – connections to Windows printers are blocked
- LPT Port Mapping – the mapping of client LPT ports is blocked.
- COM Port Mapping – mappings to COM ports is blocked
- Clipboard Mapping – clipboard mapping is blocked
- Audio Mapping – audio information is blocked

The settings that tin be changed on the Network Adapter tab are listed below:

Network Adapter drop-downwards box: Contains the available network adapters that tin connect to TerminalServices.
Unlimited connections: This selection means that no limit exists for the number of connections allowed with this network adapter.
Maximum connections: Sets the maximum number of connections allowed with this network adapter.

The access permissions that can be set for the connectedness on the Permissions tab are listed below:

Full Control: This permission allows the tasks listed beneath to be performed. The permissions is usually enabled for Administrators and the System:
- Modify connexion settings
- Log on to a session
- Connect to an existing session
- Log off some other user from a session
- Disconnect some other user from a session
- Take command of the session
- Send a bulletin to a user or session
- Query for information on the session
User Access: This permission allows the tasks listed below to be performed:
- Log on to a session
- Connect to an existing session
- Ship a message to another user
- Query for information on the session
Guest Access: This permission allows the tasks listed below to be performed:
- Log on to a session
Service: This permission allows the tasks listed beneath to be performed:
- Ship a bulletin to another user
- Query for data on the session